Best-in-class ferro separator
The best way to optimize ferrous scrap separation
By means of the TA-PO 1000 an extra separation is made between magnetic and partially magnetic materials. This results in a purer iron fraction, suitable for immediate reuse. Both fractions represent a higher value.
When the TA-PO 1000 is used to separate copper particles, the iron fraction contains less than 0.2% copper particles.
The recovery rate can reach 99.3% by using the TA-PO 1000.
The motto is quality and simplicity. One of the building criteria of the TA-PO 1000 was the uptime. Due to innovative design on various components, maintenance is kept to a minimum and can be done in a short period of time.
The machine has proved itself in practice. Due to the stable and high-quality process maintenance time is 0.4% and maintenance cost of 2.2% of the investment on a yearly basis. This leads to low operational costs.
Due to smart design minimal maintenance is needed and maintenance costs are low. Necessary maintenance, like the replacement of a conveyer belt, is reduced to 1 hour with this design.
Ergonomical aluminium hatches ensure high user friendliness during cleaning or maintenance.
To renew the conveyer belt, the chute and covers need to be removed. This is automatically done by the TA-PO 1000 and takes less than a minute.
The endless conveyer belt is available in different qualities. Depending on your scrap, the right conveyer belt can be selected.
The TA-PO 1000 is the new standard in separation, but also in safety. Emergency stops and emergency stop lines are sufficient to intervene in case of a dangerous situation. Additional external emergency stops can be added. If a hatch is opened when the TA-PO 1000 is running, the machine comes to a halt immediately. Covers open automatically and do not need to be disassembled. All ‘events’ are separately shown on the touch screen, wasting time searching is a thing of the past.
In short; safety is design, not a coincidence.
- TypeTA-PO 1000
- Weightca. 6800 kg
- Power consumption10 kW
- Noise level< 70 dB(A)
- Temperature range-10ºC - 40ºC
- Capacity fraction size10 t/m 200 mm
See more details in the brochure of the TA-PO 1000.